Instructions:
Step 1.- Enter the dimensions of your Project in the Width x Length boxes below.

Note: For areas that are not a single square/rectangle, break the irregular areas up into smaller square/rectangular sections. Determine the dimensions of each of the smaller sections and add them up to get the total square footage of your Project.

Width x Length

Step 2.-Choose a Tile Style below with a double click of your mouse to begin your Project design.

Horizontal
	Classic	Arizona	Double	Classic	Arizona	Double	Classic	Arizona	Double
Vertical
	Ipe			Grapia			Curupay
Selected Tile To Place On Design Grid				Clear

Step 3.- Simply click on a grid square where you want to “install” the tile you have selected.
One Click places the selected tile on the grid.
Two Clicks clears the grid square leaving it blank for another tile selection.

Step 4.- Total Tiles (by Style) used In Your Design is automatically calculated for you.

Step 5.-“Finishing Touch” Accessories, Straight Reducers and Corner Reducers, will complete your Project.

Simply count the number of reducers required to “Finish” the perimeter according to your design.
Each corner of the design perimeter will require one Left and one Right Corner Reducer.

Tiles and Reducers may be easily cut to fit irregularities such as angles, curves, or around railing posts, pillars, or columns. It's a good idea to order a few extra tiles and reducers than you actually need to compensate for any miscalculations or cutting mishaps, and if you ever want to replace a tile, alter, or adjust your pattern in the future, you will have some on hand.

Eco Woods Decking products carry a Manufacturer’s Full 10 year Warranty but, in most normal settings will last a Life-Time, and remember you can just as easily uninstall them if you so desire, and take them with you when you move.

Step 6.- Place your Order .